40 tons vertical pull-up hydraulic pulling machine

Technical Scheme of Hydraulic Vertical Broaching Machine

The hydraulic puller equipment referred to in this technical scheme includes the communication between the host part, the electrical control system, the safety system and the hydraulic system.

recommend models:

1. Host part

(1) Machine model: 40 tons vertical hydraulic pulper line rail cast iron bed

(2) Basic parameters of working range

Spline larger diameter can be processed 100mm

Single key larger processing width 60mm

Production speed: 100-150 pieces/hour

(3) Equipment basic parameters

Workbench two cylinder spacing 420mm table diameter (can be customized)

The height of the working table from the ground is 700mm

Effective stroke 1700mm

Overall size 2300mm(L)* 1500mm(W)* 4200mm(H)

Weight of the whole machine 4200kg

Overall machine power 22kw (main oil pump motor)

Power supply voltage 380v (three items)

Automatic lifting knife has

Fuel tank volume 320 litres

2. Brand of hydraulic oil:

46# antiwear hydraulic oil

Mechanical Introduction:

TP series pallet winding packaging machine is used for container transportation of bulk goods and packaging of bulk pallets. Widely used in glass products, electronic appliances, paper, ceramics, chemicals, food, beverages, building materials and other industries. It can improve logistics efficiency, reduce the loss during transportation, and has the advantages of dustproof, moistureproof, and reduce packaging costs. Is the ideal choice to enhance the packaging grade.

3. Features of equipment:

1) Control system

push-button control switch

Sensing proximity switch, electronically controlled solenoid valve, up and down travel end pause time controlled by the time relay can be freely adjusted according to work needs, to ensure the operator's smooth operation, reduce the workpiece damage rate and effective protection broach.

2) Operation mode

There are three modes of operation: jog, single step and automatic.

The operation mode is switched according to different products in order to improve the production efficiency.

3) Hydraulic system:

Equipped with hydraulic oil air-cooled cooler

High-pressure hydraulic pump (silent version)

Hydraulic tubing can withstand 60 MPa pressure

Precision grinding finishing hydraulic valve block

Brand solenoid valve

The traveling speed of the hydraulic cylinder is slowed down and back to fast, and the speed can be stepless speed regulation.

4) Guide rail part:

The guide rail is hard chrome plated on the surface with fine grinding treatment.

The sliding sleeve is made of high quality wear-resistant copper alloy.

Each sliding sleeve is equipped with anti-aging dust and anti-iron chip rubber ring.

5) Qualification Certification

The machinery conforms to the CE standard, and has the authority to issue its certificate

6) Configuration of main electrical hydraulic parts

7) Safety control:

Safety photoelectric detector.

Hydraulic valve group, smooth operation.

4. Installation:

Equipment installation position and ground shall be flat.

No other devices are allowed in the space above the equipment installation position.

The equipment must have an independent power supply, and it is strictly prohibited to share the power supply with its installed equipment.

Introduction to Machinery

Hydraulic Broaching machine series is suitable for processing single keyway, double keyway, three keyway, four keyway, spline, square hole, hexagonal hole, round hole and other metal parts. It is a high-precision and high-efficiency equipment for large-scale inner hole processing. It is widely used in automobile manufacturing, motorcycle manufacturing, food machinery, textile machinery, garden machinery, machine tool manufacturing, agricultural machinery, electric tool industry, hardware products industry and other fields.