30-ton vertical broaching machine with lifting knife 1.5 meters

Technical Scheme of Hydraulic Vertical Broaching Machine

The hydraulic puller equipment referred to in this technical scheme includes the communication between the host part, the electrical control system, the safety system and the hydraulic system.

recommend models:

1. Host part

(1) Machine model: 30 tons vertical single station hydraulic pulling machine

(2) Basic parameters of working range

Spline larger diameter can be processed 100mm

Single key larger processing width 60mm

Production speed: 100-150 pieces/hour

(3) Equipment basic parameters

● Workbench two cylinder spacing 400mm table diameter (can be customized)

● The height of the worktable from the ground is 2400mm

● Effective stroke 1700mm

● Overall size 1500mm(L)* 1700mm(W)* 4600mm(H)

● Overall weight 3200kg

● Overall power 15kw (main oil pump motor)

● Power supply voltage 380v (three items)

● Automatic lifting knife has

● Fuel tank volume 320 liters

2. Brand of hydraulic oil:

46# antiwear hydraulic oil

3. Features of equipment:

1) Control system

● Push-button control switch

● Sensing proximity switch, electronically controlled solenoid valve, up and down travel end pause time controlled by the time relay can be freely adjusted according to work needs, to ensure the operator's smooth operation, reduce the workpiece damage rate and effective protection broach.

2) Operation mode

● There are three modes of operation: jog, single step and automatic.

● Switch operation mode according to different products in order to improve production efficiency.

3) Hydraulic system:

●Equipped with hydraulic oil air-cooled cooler

● High-pressure hydraulic pump (silent version)

●Hydraulic tubing can withstand 60 MPa pressure

● Fine grinding finishing hydraulic valve block

● Brand solenoid valve

● The traveling speed of the hydraulic cylinder is slowed down and back to fast speed, and the speed can be stepless speed regulation.

4) Guide rail part:

● Guide rail for the surface of the hard chrome-plated grinding treatment.

The sliding sleeve is made of high quality wear-resistant copper alloy.

● Each sliding sleeve is equipped with anti-aging dust and anti-iron chip rubber ring.

5) Qualification Certification

The machinery conforms to the CE standard, and has the authority to issue its certificate

6) Configuration of main electrical hydraulic parts

7) Safety control:

● Safety photoelectric detector.

● Hydraulic valve group, smooth operation.

4. Installation:

(1) Equipment installation position and ground shall be flat.

(2) No other devices are allowed in the space above the equipment installation position.

(3) The equipment must have an independent power supply, and it is strictly prohibited to share the power supply with its installed equipment.

Introduction to Machinery

Hydraulic Broaching machine series is suitable for processing single keyway, double keyway, three keyway, four keyway, spline, square hole, hexagonal hole, round hole and other metal parts. It is a high-precision and high-efficiency equipment for large-scale inner hole processing. It is widely used in automobile manufacturing, motorcycle manufacturing, food machinery, textile machinery, garden machinery, machine tool manufacturing, agricultural machinery, electric tool industry, hardware products industry and other fields.